The Passive PoE injector has been specially developed for the voltage supply of the Photo Webcam. The Passive PoE injector supplies the camera and the camera controller as well as the heater with sufficient power.

Pictures: Passive PoE injector

Warning

The Passive PoE injector is not compatible with Active PoE/ PoE+ devices (802.3 af / at) and must not be used for their voltage supply. The Passive PoE injector is suitable only for passive voltage supply, otherwise it can destroy your device.

Bild: Plug

Plug/ Jumper	Pin	Function
P1	1	Input voltage 15-56 VDC
	2	Ground GND
	3	Not used
	4	Ground GND
	5	Deactivates PoE output if Ground GND is applied
	6	Deactivates PoE output if VDC is applied
J1	RJ45	Ethernet towards Internet
J2	RJ45	Ethernet + PoE output towards camera
JP1		LED on: Jumper JP1 closed LED off: Jumper JP1 open

Specifications

Function	Description
Input voltage	15 - 56 VDC / 40 watt
Ethernet	10/100/1000Base-T
Kabellänge	Max. 100 meters if high cable quality
Digital Input	Activates / deactivates PoE output
Operating temperature	-40°C to +75°C / -40°F to 167°F
Dimensions (LxWxH)	12 x 9.5 x 3.8 cm
Assembly	DIN rail

Documentation

Passive_PoE_Injector_V2_2.pdf

Browser not supported