The PoE/ PoE+ injector has been developed for the voltage supply of PoE-devices. The PoE/PoE+ injector supports the standards 802.3af and 802.3 at. A crucial benefit of the PoE/PoE+ injector is the wide input voltage range of 5-36 VDC. The PoE injector is ideally suited for running cameras. Due to the low input voltage it is also suitable for operations by solar power.
Pictures: PoE/PoE+ injector
Important
Use the Passive PoE Injector if the photo webcam is used with a front glass defroster heater.
Picture: Plug PoE/PoE+ Injector
| Plug/ Jumper | Pin | Function |
|---|---|---|
| P1 | 1 | Input voltage 5-36VDC / 48-56VDC |
| 2 | Ground GND | |
| 3 | Digital output VDC if a PoE-device is connected GND if no PoE-device is connected | |
| 4 | Deactivates PoE output if Ground GND is applied | |
| 5 | Deactivates PoE output if VDC is applied | |
| J1 | RJ45 | Ethernet towards Internet |
| RJ45 | Ethernet plus PoE/PoE+ output towards camera | |
| JP1 + JP2 | Configuration input voltage | |
| JP3 | Output voltage |
Specifications
| Function | Description |
|---|---|
| Input voltage | 5-36VDC / 30W |
| Output | 802.3af 48VDC 15.4W or 802.3at 56VDC 25.5W configurable |
| Ethernet | 10/100/1000Base-T |
| Digital Input | schaltet PoE+ Ausgang ein/aus, pull-up/pull-down, VDC Eingangsspannung |
| Digital Output | Monitorsignal zur Kontrolle, ob POE+ Verbraucher angeschlossen, open Collector |
| Operating temperature | -40°C to +75°C / -40°F to 167°F |
| Dimensions (LxWxH) | 12 x 9.5 x 3.8 cm |
| Assembly | DIN rail optional |
Add Comment