The Passive PoE injector has been specially developed for the voltage supply of the photo webcam. The Passive PoE injector supplies the camera and the camera controller as well as the heater with sufficient power.
Pictures: Passive PoE injector
Warning
The Passive PoE injector is not compatible with Active PoE/ PoE+ devices (802.3 af / at) and must not be used for their voltage supply. The Passive PoE injector is suitable only for passive voltage supply, otherwise it can destroy your device.
Bild: Plug
| Plug/ Jumper | Pin | Function |
|---|---|---|
| P1 | 1 | Input voltage 15-56 VDC |
| 2 | Ground GND | |
| 3 | Not used | |
| 4 | Ground GND | |
| 5 | Deactivates PoE exit if Ground GND is applied | |
| 6 | Deactivates PoE exit if VDC is applied | |
| J1 | RJ45 | Ethernet towards Internet |
| J2 | RJ45 | Ethernet + PoE exit towards camera |
| JP1 | LED on: Jumper JP1 closed |
Specifications
| Function | Description |
|---|---|
| Input voltage | 15 - 56 VDC / 40 watt |
| Ethernet | 10/100/1000Base-T |
| Kabellänge | Max. 100 meters if high cable quality |
| Digital Input | Activates / deactivates PoE exit |
| Operating temperature | -40°C to +75°C / -40°F to 167°F |
| Dimensions (LxWxH) | 12 x 9.5 x 3.8 cm |
| Assembly | DIN rail |
Add Comment