Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

The Passive PoE injector has been specially developed for the voltage supply of the photo webcam. The Passive PoE injector supplies the camera and the camera controller as well as the heater with sufficient power.


Pictures: Passive PoE injector

Warning

The Passive PoE injector is not compatible with Active PoE/ PoE+ devices (802.3 af / at) and must not be used for their voltage supply. The Passive PoE injector is suitable only for passive voltage supply, otherwise it can destroy your device.


Bild: Plug

Plug/ JumperPinFunction
P11Input voltage 15-56 VDC

2Ground GND

3Not used

4Ground GND

5Deactivates PoE exit if Ground GND is applied

6Deactivates PoE exit if VDC is applied
J1RJ45Ethernet towards Internet
J2RJ45Ethernet + PoE exit towards camera
JP1

LED on: Jumper JP1 closed
LED off: Jumper JP1 open

Specifications

FunctionDescription
Input voltage15 - 56 VDC / 40 watt
Ethernet10/100/1000Base-T
KabellängeMax. 100 meters if high cable quality
Digital InputActivates / deactivates PoE exit
Operating temperature-40°C to +75°C / -40°F to 167°F
Dimensions (LxWxH)12 x 9.5 x 3.8 cm
AssemblyDIN rail

Documentation

Passive_PoE_Injector_V2_2.pdf


  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.